Bathtub skirt paving standard

Skirt facade with stone lines thick square wire frame, wire frame center, the internal general with stone mosaic collage, mosaic and wireframe up and down and left and right layout equal.more at:jiahengstone
Six, wash the table and the countertop countertops and water drops before the standard
1, wash the surface height of the block is generally 100mm, the height of the cabinet countertops generally 50 mm;
2, cornice lines wide out of the door 20-30mm, the same project standards should be consistent;
3, cornices below the line into the 10 mm should be opened a 4 mm * 4 mm drain tank, so as not to flow on the countertops to the cabinet door.
Seven, wash the table and the countertop table opening and grinding standards
1, wash basin and vegetable bowl hole distance from the file after the water ≥ 120mm, leaving enough to install the leading position, and to ensure that the drawing of the water bracket operating space, the faucet from the basin installed as close as possible;
2, wash the table under the pot and wash the table under the basin table size and the relationship between the basin in strict accordance with the platform manufacturers to provide the installation of the table opening;
3, wash basin under the basin of stone openings are generally smaller than the basin diameter, stone edging pressure basin wall 5-10 mm, wash the pot under the pot of stone openings are generally larger than the basin diameter, stone edging to the inside of the basin Edge 3-10 mm, or align the inner wall of the basin;
4, the edge of the process requirements: wash basin under the basin generally rounded round, or the French side of the line; wash the pot under the pot straight grinding straight side, or micro arc round edge.
Eight, drinking water table edging and installation standards
1, drinking water table should be around the flanging, and the table to maintain the height of 5-10mm up the mouth;
2, drinking water table should be purified faucet and outlet, the faucet is located in the corner with the faucet far, the table to the tip of the tip to maintain a slight slope of 1%

Indoor stone decoration detail node construction technology standards

First, the floor window stone countertops and floor paving standards:
1, the windows of the windows of the windows fell to the ground, the stone plate embedded in the window between the two sides of the window between the edge of the plate edge of the window line at least 3mm; more at:jiahengstone
2, stone plate embedded in the plate plate-type inner mouth, vertical plate and table plate line outside the mouth 20-30mm, the same project standards should be consistent;
3, wooden baseboard line on both sides of the window line and lower than the window line thickness.
Second, the high window window plate extension length and width standards:
The length of the exit of the window plate is more than 30 mm, and the width of the plate extends beyond the maximum thickness of the front of the window line 20 mm (the length and width of the plate are not linearly).
Third, the stairs stepped outside the side of the standard
1, step flat exposed side of the line surrounded by three sides, linear bottom plane polished;
2, step by step outside the polished plate, step up the length of the floor than the stairs to complete the surface decoration 2-5 mm, the same project length beyond the standard should be consistent;
3, vertical plate thickness of the back side of the pedal line inside;
4, the same stairs every step should be high.
Fourth, kitchen and toilet sets of stone base standard
Kitchen door and window sets of stone base scale and bedroom door sets of wooden base with the same height, the general height of 250MM, sets of base width and width of the base line, or outside the wide line 5-10mm, thickness higher than the set Line 5-10mm (same item standard should be consistent).